SKU: cp12 Categories: Chimney Pots, Decorative Pots Tags: decorative chimney pot, louvered chimney pot, reclaimed chimney pot, salt glazed chimney pot, tall chimney pot

Tall Glazed Louvered Crowned Chimney Pot

£125.00 + Vat

Out of stock

National Pallet Delivery
In store click & collect
Quality reclaimed products

Product Info

Tall Glazed Louvered Crowned Chimney Pot

Tall crowned and louvered salt glazed chimney pot. A fantastic Victorian style. In great condition with no damage.

Square base with a round shaft. Shaft is beaded at top and bottom. Above the shaft is a three bowl louver. The crown has 6 points.

This pot would look also great hiding in the greenery of a classic English garden.

Tall Glazed Louvered Crowned Chimney Pot Dimensions

Height: 1200mm

Outer diameter at top: 250mm

Inner diameter at top: 225mm

Outer base: 345mm

Inner base: 310mm

Chimney Pots

A chimney pot found on top of a chimney expands the length of a chimney inexpensively. Also to improve the chimney’s draft. A chimney with more than one pot on it indicates that multiple fireplaces on different floors share the chimney.

Chimney pots are normally terracotta ceramic pots that sit atop your chimney. They can be used to add external character, charm and beauty to any home or building. The shape of a chimney pot can vary to suit the style you require. A chimney pot can be round, square, octagonal or even rectangular.

Read more about chimneys and chimney pots here.

Ways to Repurpose a Chimney Pot

Have a look at our Pinterest page to see some amazing pots and great ways to repurpose them.

More Chimney Pots

Find more Chimney Pots here.

Do you have any chimneys tiles to sell?

Follow this link and submit an ad. Also your first listing is free

Weight	80 kg
Dimensions	120 × 250 × 345 cm

Reviews

There are no reviews yet.

Be the first to review “Tall Glazed Louvered Crowned Chimney Pot” Cancel reply

You must be logged in to post a review.

Slate Calculator

Slating Headlap

Lap

Expandable Headlap Info

Choosing Headlap

Definition: The vertical overlap between successive rows of tiles to prevent water ingress.

Factors to consider:

Roof pitch: Shallower pitches (< 30°) need 75–100 mm; steeper (> 45°) can use 50 mm.
Climate & exposure: Wind-driven rain or heavy rainfall zones benefit from more headlap.
Tile profile: Deeper tiles may require extra overlap to seal correctly.

Rule of thumb:

Standard (30–45°): 50–75 mm
Low (< 30°): 75–100 mm
High (> 45°): 50 mm

Slate Size / Type

Slate 50mm Lap

Selecting Tile Size

Coverage per tile: Larger tiles cover more area but are heavier, affecting handling and substrate load.

Aesthetic scale: Big tiles suit modern, minimal lines on large roofs; smaller tiles give more texture and a traditional look.

Structural limits: Check rafters and battens can support the chosen tile’s weight and fixing centres.

Installation speed vs. waste: Larger tiles lay faster but may require more cutting at edges, increasing waste. Smaller tiles take longer but can reduce off-cuts.

Compatibility: Ensure the tile size works with your chosen headlap & side-lap for correct coverage per m².

By balancing pitch, weather, substrate capacity and appearance, you’ll pick the optimal tile size for performance and style.

Slate 75mm Lap

Selecting Tile Size

Coverage per tile: Larger tiles cover more area but are heavier, affecting handling and substrate load.

Aesthetic scale: Big tiles suit modern, minimal lines on large roofs; smaller tiles give more texture and a traditional look.

Structural limits: Check rafters and battens can support the chosen tile’s weight and fixing centres.

Installation speed vs. waste: Larger tiles lay faster but may require more cutting at edges, increasing waste. Smaller tiles take longer but can reduce off-cuts.

Compatibility: Ensure the tile size works with your chosen headlap & side-lap for correct coverage per m².

By balancing pitch, weather, substrate capacity and appearance, you’ll pick the optimal tile size for performance and style.

Slate 100mm Lap

Selecting Tile Size

Coverage per tile: Larger tiles cover more area but are heavier, affecting handling and substrate load.

Aesthetic scale: Big tiles suit modern, minimal lines on large roofs; smaller tiles give more texture and a traditional look.

Structural limits: Check rafters and battens can support the chosen tile’s weight and fixing centres.

Installation speed vs. waste: Larger tiles lay faster but may require more cutting at edges, increasing waste. Smaller tiles take longer but can reduce off-cuts.

Compatibility: Ensure the tile size works with your chosen headlap & side-lap for correct coverage per m².

By balancing pitch, weather, substrate capacity and appearance, you’ll pick the optimal tile size for performance and style.

Slates Per m2

Expandable Slates per m² Info

Calculating Slates per m²

Definition: Number of slates needed to cover one square metre.

Formula: 1 000 000 mm² ÷ (effective width × effective height)

Where:

Effective width = tile width – side lap
Effective height = tile height – head lap

Example: 610 mm × 355 mm tile, 20 mm side lap, 75 mm head lap:

Effective width: 610 − 20 = 590 mm
Effective height: 355 − 75 = 280 mm
Area per slate: 590 × 280 = 165 200 mm²
Slates per m²: 1 000 000 ÷ 165 200 ≈ 6.05

Adjust your headlap and sidelap values for precise coverage calculations.

Slate Required(Required)

Measure Your Roof Area

Determining Your Roof’s Area (m²) Accurately measuring your roof is essential to estimate how much slate you’ll need. Follow these steps: Measure the rafter length Runs from the gutter up to the ridge line.

Width (m)

Length (m)

Total Mtr²

Total Slates Required

Copper Nails Total KG

Expandable Copper Nails Info

Copper Nails for Slating: Overview & Specs

Why use copper nails?

Corrosion resistance: Forms a protective patina to prevent rust and staining.
Superior durability: Lasts for decades without needing replacement.
Optimal flexibility: Absorbs roof movement without cracking or shearing.
Aesthetic harmony: Weathers to a warm patina that complements natural slate.
Chemical compatibility: No galvanic reaction with slate or lead flashings.

Packaging & usage:

Approx. 250 copper nails per kg
Minimum 2 nails per slate
Recommended length: 25–30 mm shank, 3.35 mm (4 gauge) head

Expandable Free Quote Info

Get a Free Quote

We’ll find the best price for the slates you need and email you a no-obligation quote.

Name(Required)

First Last

Delivery Address(Required)

Street Address City ZIP / Postal Code

Phone(Required)